Ignition timing inspection
- Make
- Mazda
- Model
- MX-5 (NC) Factory Workshop Manual
- Year
- 2006–2008
- Section
- Mechanical › Ignition timing inspection
EngineIgnition timing inspection
- Start the engine.
- Racing at the engine speed 2,500-3,000 rpm for 3 min.
- Turn off the electrical loads.
- Wait until the cooling fans stop.
- Connect the SST (M-MDS or equivalent) to the DLC-2.
Courtesy of MAZDA MOTORS CORP.
- Verify that the idling speed (M-MDS: RPM PID) is within the specification using the M-MDS or equivalent function.
Standard
AT: 700-800 rpm
MT: 670-770 rpm
IGNITION TIMING INSPECTION
NOTE: Ignition timing is not adjustable.
Ignition timing verification requires M-MDS or equivalent.
Parts & tools for this job For 2006 Mazda MX-5
- PARTEngine gasket setSearch: Mazda MX-5 2006 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
As an Amazon Associate we earn from qualifying purchases.