Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)02 · Engine
02 · Engine

Compression inspection [lf]

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Mechanical › Compression inspection [lf]
EngineCompression inspection [lf]

IN: 0.22-0.28 mm {0.0087-0.0110 in}

EX: 0.27-0.33 mm {0.0107-0.0129 in}

  1. Install the cylinder head cover. (See CYLINDER HEAD COVER INSTALLATION NOTE .)
  2. Install the ignition coils. (See IGNITION COIL REMOVAL/INSTALLATION [LF] .)
  3. Connect the OCV connector.
  4. Install the CMP sensor. (See CAMSHAFT POSITION (CMP) SENSOR REMOVAL/INSTALLATION [LF] .)
  5. Install the front suspension tower bar (joint). (See FRONT SUSPENSION TOWER BAR REMOVAL/INSTALLATION .)
  6. Connect the ventilation hose. (See QUICK RELEASE CONNECTOR (EMISSION SYSTEM) REMOVAL/INSTALLATION [LF] .)
  7. Install the air cleaner. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [LF] .)
  8. Install the plug hole plate. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [LF] .)
  9. Install the battery and battery tray. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [LF] .)

COMPRESSION INSPECTION [LF]

WARNING: Hot engines and oil can cause severe burns. Be careful not to burn yourself during removal/installation of each component.

  1. Verify that the battery is fully charged.
  2. Warm up the engine to the normal operating temperature.
  3. Stop the engine and allow it to cool down for about 10 min.
  4. Perform "Fuel Line Safety Procedures". Leave the fuel pump relay removed. (See BEFORE SERVICE PRECAUTION [LF] .)

WARNING: Fuel vapor is hazardous. It can very easily ignite, causing serious injury and damage. Always keep sparks and flames away from fuel.

Fuel line spills and leakage are dangerous. Fuel can ignite and cause serious injuries or death and damage. Fuel can also irritate skin and eyes. To prevent this, always complete the "Fuel Line Safety Procedure". (See BEFORE SERVICE PRECAUTION [LF] .)

  1. Remove the fuel pump relay.
  2. Remove the front suspension tower bar (joint). (See FRONT SUSPENSION TOWER BAR REMOVAL/INSTALLATION .)

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.