Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)02 · Engine
02 · Engine

Valve clearance adjustment [lf] (page 17 of 17)

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Mechanical
EngineValve clearance adjustment [lf] · page 17 of 17
ENGINE – Mechanical – figure
Fig. 28: Identifying Where To Measure Valve Clearance
Courtesy of MAZDA MOTORS CORP.

NOTE: Make sure to note down the measured values for choosing the suitable replacement tappets.

Valve clearance [Engine cold]

IN: 0.22-0.28 mm {0.0087-0.0110 in}

EX: 0.27-0.33 mm {0.0107-0.0129 in}

  1. Turn the crankshaft 360° clockwise so that the No. 4 piston is at TDC of the compression stroke.
  2. Measure the valve clearance at B in Fig. 28 .

NOTE: Make sure to note down the measured values for choosing the suitable replacement tappets.

Valve clearance [Engine cold]

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.