Valve clearance adjustment [lf] (page 16 of 17)
- Make
- Mazda
- Model
- MX-5 (NC) Factory Workshop Manual
- Year
- 2006–2008
- Section
- Mechanical
EngineValve clearance adjustment [lf] · page 16 of 17
Courtesy of MAZDA MOTORS CORP.
- Install the drive belt. (See DRIVE BELT REPLACEMENT [LF] .)
- Measure the valve clearance.
- Turn the crankshaft clockwise so that the No.1 piston is at TDC of the compression stroke.
- Measure the valve clearance at A in Fig. 28 .
- If the valve clearance is out of the specification, adjust it. (See VALVE CLEARANCE ADJUSTMENT [LF] .)
Parts & tools for this job For 2006 Mazda MX-5
- PARTEngine gasket setSearch: Mazda MX-5 2006 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
As an Amazon Associate we earn from qualifying purchases.