Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)02 · Engine
02 · Engine

Valve clearance adjustment [lf] (page 4 of 17)

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Mechanical
EngineValve clearance adjustment [lf] · page 4 of 17
ENGINE – Mechanical – figure
Fig. 15: Installing SST
Courtesy of MAZDA MOTORS CORP.
  1. Turn the crankshaft clockwise until the crankshaft is in the No.1 cylinder TDC position.
  2. Loosen the timing chain.
  3. Using a suitable screwdriver or equivalent tool, unlock the chain tensioner ratchet.
  4. Turn the exhaust camshaft clockwise using a suitable wrench on the cast hexagon and loosen the timing chain.
  5. Placing the suitable bolt (M6 X 1.0 length 25 mm-35 mm {0.99 in-1.37 in}) at the engine front cover upper blind plug, secure the chain guide at the position where the tension is released.

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.