Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)02 · Engine
02 · Engine

Front oil seal replacement [lf]

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Mechanical › Front oil seal replacement [lf]
EngineFront oil seal replacement [lf]
ENGINE – Mechanical – figure
Fig. 52: Tightening Sequence Of Camshaft Cap Bolts
Courtesy of MAZDA MOTORS CORP.

FRONT OIL SEAL REPLACEMENT [LF]

  1. Remove the battery and battery tray. (See BATTERY REMOVAL/INSTALLATION [LF] .)
  2. Remove the air cleaner. (See AIR CLEANER ELEMENT INSPECTION [LF] .)
  3. Remove the drive belt. (See DRIVE BELT INSPECTION [LF] .)
  4. Remove the under cover. (See TRANSVERSE MEMBER REMOVAL/INSTALLATION .)
  5. Remove the front suspension tower bar. (joint)
  6. Remove the ignition coil. (See IGNITION COIL REMOVAL/INSTALLATION [LF] .)
  7. Remove the OCV connector.
  8. Remove the cylinder head cover. (See TIMING CHAIN REMOVAL/INSTALLATION [LF] .)
  9. Remove the CKP sensor. (See CRANKSHAFT POSITION (CKP) SENSOR REMOVAL/INSTALLATION [LF] .)
  10. Remove in the order indicated in Fig. 53 .
  11. Install in the reverse order of removal.

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.