Cylinder head installation note
- Make
- Mazda
- Model
- MX-5 (NC) Factory Workshop Manual
- Year
- 2006–2008
- Section
- Mechanical › Cylinder head installation note
EngineCylinder head installation note · page 1 of 2
Courtesy of MAZDA MOTORS CORP.
CYLINDER HEAD INSTALLATION NOTE
- Measure the length of each cylinder head bolt.
- Replace any that exceed the maximum length.
Cylinder Head Bolt Length L
145.2-145.8 mm {5.72-5.74 in}
Cylinder Head Bolt Maximum
146.5 mm {5.77 in}
Parts & tools for this job For 2006 Mazda MX-5
- PARTEngine gasket setSearch: Mazda MX-5 2006 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
As an Amazon Associate we earn from qualifying purchases.