Cylinder head installation note (page 2 of 2)
- Make
- Mazda
- Model
- MX-5 (NC) Factory Workshop Manual
- Year
- 2006–2008
- Section
- Mechanical
EngineCylinder head installation note · page 2 of 2
Courtesy of MAZDA MOTORS CORP.
- Tighten the cylinder head bolts in the order shown in Fig. 51 with the following 5 steps using the SST (49 D032 316).
- Tighten to 5.0 N.m {51.0 kgf.cm, 44.3 in.lbf}
- Tighten 13-17 N.m {1.4-1.7 kgf.m, 10.0-12.5 ft.lbf}
- Tighten 44-46 N.m {4.5-4.6 kgf.m, 32.5-33.9 ft.lbf)
- Tighten 88+/-92°
- Tighten 88+/-92°
Parts & tools for this job For 2006 Mazda MX-5
- PARTEngine gasket setSearch: Mazda MX-5 2006 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
As an Amazon Associate we earn from qualifying purchases.