Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)02 · Engine
02 · Engine

Timing chain installation note

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Mechanical › Timing chain installation note
EngineTiming chain installation note
ENGINE – Mechanical – figure
Fig. 36: Removing/Installing Oil Pump Sprocket And Crankshaft Pulley
Courtesy of MAZDA MOTORS CORP.
  1. Install the oil pump sprocket, and then remove the crankshaft pulley and crankshaft pulley lock bolt.

Tightening torque

20-30 N.m {2.1-3.0 kgf.m, 14.8-22.1 ft.lbf}

TIMING CHAIN INSTALLATION NOTE

  1. Install the SST to the camshaft as shown in Fig. 37.
  2. Install the timing chain.

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.