Workshop Manuals Factory service & repair Rover
01 Introduction02 General information03 Information04 Engine - KV605 Engine - diesel06 Engine - T Series07 Emission control08 Engine management system - MEMS09 Engine management system - EDC10 Fuel delivery system11 Cooling system - KV612 Cooling system - diesel13 Manifold & exhaust systems14 Clutch15 Manual gearbox - PG116 Manual gearbox - T75017 Automatic gearbox - JF403E18 Drive shafts19 Steering20 Brakes21 Restraint systems22 Body23 Air conditioning24 Wipers & washers25 Electrical26 Instruments
Rover 800 Workshop Manual (1996-1999)17 · Automatic gearbox - JF403E
17 · Transmission

Differential oil seal

Make
Rover
Model
800 Workshop Manual
Year
1996–1999
Section
Repairs › Differential oil seal
Automatic gearbox - JF403EDifferential oil seal

DIFFERENTIAL OIL SEAL

Service repair no - 54.10.18

  1. Remove drive shaft. See DRIVE SHAFTS, Repairs.
  2. Clean area around oil seal.
Differential oil seal – Clean area around oil seal.
  1. Carefully prise seal out of housing.

Refit

  1. Thoroughly clean oil seal recess.
Differential oil seal – Thoroughly clean oil seal recess.
  1. Fit new seal using tool 18G 1352 with adapter 18G 1752.
  2. Fit drive shaft. See DRIVE SHAFTS, Repairs.

Parts & tools for this job For 1996 Rover 800

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.