Workshop Manuals Factory service & repair Rover
01 Introduction02 General information03 Information04 Maintenance05 Engine - K1606 Engine - K16 with VVC07 Emission control08 Engine management system - MEMS09 Fuel delivery system10 Cooling system11 Manifold & exhaust systems12 Clutch13 Manual gearbox - R6514 Manual gearbox - PG115 Automatic gearbox - CVT16 Steering17 Front suspension18 Brakes19 Restraint systems20 Body21 Heating & ventilation22 Air conditioning23 Wipers & washers24 Electrical25 Instruments
Rover 200/400 Coupé, Cabriolet & Tourer Workshop Manual Supplement21 · Heating & ventilation
21 · Heating & A/C

Intake air filter

Make
Rover
Model
Coupé, Cabriolet & Tourer 200/400 Coupé, Cabriolet & Tourer Workshop Manual Supplement
Section
Repairs › Intake air filter
Heating & ventilationIntake air filter

INTAKE AIR FILTER

Service repair no - 80.15.42

The intake air filter should be renewed every 12,000 miles (20,000 km) or 12 months whichever comes first. In hot or dusty climates the filter may require renewing more frequently.

Remove

  1. Remove glove box. See BODY, Interior trim components.
Intake air filter – Remove glove box. See BODY, Interior trim components.
  1. Remove 1 screw and loosen second screw securing glovebox support bar to fascia.
  2. Position glovebox support bar aside.

Parts & tools for this job For Rover Coupé, Cabriolet & Tourer

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.