Excess pressure sensor - r.r.
- Make
- Fiat
- Model
- 500 Factory Service Manual
- Year
- 2007–2024
- Section
- Diesel injection system › Excess pressure sensor - r.r.
EngineExcess pressure sensor - r.r.
EXCESS PRESSURE SENSOR - R.R.
Removing
- Disconnect the negative battery terminal.
| Description | Connector | |
|---|---|---|
| Battery | See A001 BATTERY |
Op. 1048A10 AIR FILTER ASSEMBLY - R.R.
1. Detach the pressure relief sensor electrical connection.
| Description | Connector | |
|---|---|---|
| 1 | Turbocharging sensor | See K082 SUPERCHARGING SENSOR |
2. Undo retaining bolt (2a) and remove overpressure sensor (2b).
Refitting
1. Fit the excess pressure sensor (1a) in place and tighten the fixing bolt (1b).
2. Secure the electrical connection for the excess pressure sensor.
| Description | Connector | |
|---|---|---|
| 2 | Turbocharging sensor | See K082 SUPERCHARGING SENSOR |
Op. 1048A10 AIR FILTER ASSEMBLY - R.R.
- Connect the negative battery terminal.
| Description | Connector | |
|---|---|---|
| Battery | See A001 BATTERY |
Parts & tools for this job For 2007 Fiat 500
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.