Workshop Manuals Factory service & repair Land Rover
Land Rover Discovery II (UK)25 · Automatic gearbox - ZF4HP22/24
25 · Transmission

Lock-up solenoid valve (MV 3) (page 2 of 2)

Make
Land Rover
Model
Discovery II (UK)
Section
Repairs
Automatic gearbox - ZF4HP22/24Lock-up solenoid valve (MV 3) · page 2 of 2

Refit

  1. Clean MV2 shift control solenoid valve with lint Harness - solenoid valves free cloth.
  2. Position MV2 shift control solenoid valve to

$% 44.15.52 valve body.

  1. Position retaining fork, fit Torx screw and

Remove

tighten to 8 Nm (6 lbf.ft).

  1. Connect multiplugs to both shift control solenoid valves.
  2. Clean lock-up solenoid valve assembly with a lint-free cloth.
  3. Position lock-up valve assembly, fit and tighten Torx screws to 8 Nm (6 lbf.ft).
  4. Fit valve body assembly. AUTOMATIC GEARBOX - ZF4HP22 - 24, REPAIRS, Valve body assembly.
  5. Remove valve body assembly. AUTOMATIC GEARBOX - ZF4HP22 - 24, REPAIRS, Valve body assembly.
M44 1350
  1. Release and remove clip securing pressure regulator solenoid harness to valve body.
  2. Disconnect multiplug from pressure regulator solenoid valve.
M44 1355
  1. Disconnect multiplugs from lock-up solenoid valve, shift control solenoid valves MV 1 and MV 2.
  2. Release harness from 5 clips on valve body and remove harness.

Parts & tools for this job For Land Rover Discovery

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.