L322 Range Rover Service Procedures
RESTRAINT SYSTEMS
75-12
REPAIRS
5. Disconnect 5 multiplugs from rotary coupler.
6. Remove rotary coupler assembly.
NOTE: Do not carry out further dismantling if
component is removed for access only.
7. Depress clips and remove switches from
coupler assembly.
Refit
1. Fit switches to rotary coupler.
2. Connect multiplugs to rotary coupler.
3. Fit rotary coupler to column, secure with Torx
screws.
4. Fit steering column nacelle.
5. Fit steering wheel
6. Connect battery leads, earth lead last.
Airbag module - side impact - front door
$% 76.74.30
Before disconnecting the battery, ensure all text and
cautions in the battery disconnection section are
observed.
GENERAL INFORMATION, Electrical
WARNING: It is imperative that before any work
is undertaken on the SRS system, the
appropriate information is read thoroughly.
WARNING: Always disconnect both battery leads
before beginning work on the SRS system.
Disconnect the negative lead first. Never reverse
connect the battery.
CAUTION: The SRS side impact sensor must be
replaced after every side deployment has
occurred. Only replace the side impact sensor on
the deployed side.
Remove
1. Make the SRS system safe.
Supplementary Restraint System (SRS)
Precautions.
2. Remove door trim casing.
3. Disconnect multiplug from airbag module.
4. Remove and discard 3 bolts securing airbag
module.
M76 4371
M76 4297