L322 Range Rover Service Procedures
RESTRAINT SYSTEMS
75-22
REPAIRS
11. Press deployment tool operating button to
deploy airbag module.
12. Disconnect deployment tool from battery.
WARNING: During deployment parts of the
airbag module become hot enough to burn
you. Wait 30 minutes after deployment
before touching the airbag module.
13. Disconnect deployment tool fly lead from
airbag.
14. Remove airbag module from holding tools and
place in a sealed bag, ready for disposal.
15. Wipe down holding tools with a damp cloth and
remove from vice.
16. Transport deployed airbag module to
designated area for incineration.
CAUTION: Do not re-use or salvage any
parts of the SRS system.
NOTE: Do not transport deployed SRS
components in the vehicle passenger
compartment.
Airbag module - passenger - deployment
- in vehicle
$% 76.74.17
These guidelines are written to aid authorised
personnel to carry out the safe disposal of airbag
modules.
Deploy
WARNING: It is imperative that before any
work is undertaken on the SRS system, the
appropriate information is read thoroughly.
1. Make the SRS system safe.
Supplementary Restraint System (SRS)
Precautions.
2. Remove glove box.
3. Disconnect multiplugs from airbag module.
4. Check condition of deployment tool LRT-86-
003 and associated fly leads.
M76 4607A