landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

ENGINE AND GEARBOX|Page 189 > < ENGINE AND GEARBOX|Page 187
Page 119
background image

12

ENGINE

NEW RANGE ROVER

8

REPAIR

16. Release clip. Disconnect fuel return hose from

Fuel Injection Pump (FIP).

17. Disconnect multiplugs from fuel heater and turbo

boost sensor.

18. Position harness aside over engine.
19. Drain cooling system.

See COOLING SYSTEM,

Repair.

20. Discharge air conditioning system.

See AIR

CONDITIONING, Adjustment.

21. Remove cooling fan.

See COOLING SYSTEM,

Repair.

22. Remove engine oil cooler.

See this section.

23. Disconnect gearbox oil cooler. Remove ’O’ rings

and discard. Tie pipes aside on engine.

CAUTION: Where pipes are disconnected,
plug pipes and ports to prevent ingress of
dirt.

24. Disconnect bottom hose from radiator.

25. Disconnect coolant bleed hose from radiator.

ENGINE AND GEARBOX|Page 189 > < ENGINE AND GEARBOX|Page 187