Range Rover P38
BMW DIESEL
15
REPAIR
63. Remove 4 nuts securing each engine mount to
chassis. Discard nuts.
64. Fit lifting bracket to engine lifting eyes. Attach
suitable hoist.
65. Raise engine slightly. Ensure that lifting bracket
does not foul bulkhead. Remove both engine
mountings.
NOTE: It may be necessary to lower
gearbox support slightly during above
operation.
66. Raise power unit and draw forward.
67. Lower support from transmission.
NOTE: Power unit must be tilted at an
angle of approximately 45 degrees before
it can be withdrawn from engine
compartment.
68. Remove engine/transmission assembly.