Valve clearance inspection [lf] (page 2 of 2)
- Make
- Mazda
- Model
- MX-5 (NC) Factory Workshop Manual
- Year
- 2006–2008
- Section
- Mechanical
EngineValve clearance inspection [lf] · page 2 of 2
- Measure the valve clearance at A in Fig. 12 .
- If the valve clearance is out of the specification, adjust it. (See VALVE CLEARANCE ADJUSTMENT [LF] .)
NOTE: Make sure to note down the measured values for choosing the suitable replacement tappets.
Valve clearance [Engine cold]
IN: 0.22-0.28 mm {0.0087-0.0110 in}
EX: 0.27-0.33 mm {0.0107-0.0129 in}
- Turn the crankshaft 360° clockwise so that the No.4 piston is at TDC of the compression stroke.
- Measure the valve clearance at B in Fig. 12 .
- If the valve clearance is out of the specification, adjust it. (See VALVE CLEARANCE ADJUSTMENT [LF] .)
Courtesy of MAZDA MOTORS CORP.
Parts & tools for this job For 2006 Mazda MX-5
- PARTEngine gasket setSearch: Mazda MX-5 2006 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
As an Amazon Associate we earn from qualifying purchases.