Workshop Manuals Factory service & repair Rover
01 Introduction02 General information03 Information04 Engine - KV605 Engine - diesel06 Engine - T Series07 Emission control08 Engine management system - MEMS09 Engine management system - EDC10 Fuel delivery system11 Cooling system - KV612 Cooling system - diesel13 Manifold & exhaust systems14 Clutch15 Manual gearbox - PG116 Manual gearbox - T75017 Automatic gearbox - JF403E18 Drive shafts19 Steering20 Brakes21 Restraint systems22 Body23 Air conditioning24 Wipers & washers25 Electrical26 Instruments
Rover 800 Workshop Manual (1996-1999)23 · Air conditioning
23 · Heating & A/C

Air conditioning (Auto operation): Description and operation

Make
Rover
Model
800 Workshop Manual
Year
1996–1999
Section
Description and operation › Auto operation
Air conditioningAuto operation · page 1 of 2

AUTO OPERATION

The particular operating mode selected by the ATC will vary according to the outside temperature, light etc.

It should be noted that the system has been designed such that the normal interior car temperature of 25 °C, 77 °F is used as a setpoint. It is suggested that this is used initially.

WARM UP Conditions for this example are a cold overnight soak, little or no sunshine, a low temperature, - 5 °C, 23 °F or lower.

AUTO selected and setpoint at 25 °C, 77 °F:

Auto operation – AUTO selected and setpoint at 25 °C, 77 °F:
  1. AUTO button
  2. Temperature select switch
  3. Selected temperature
  4. Blower
  5. ATC switch pack
  6. Light sensor

Parts & tools for this job For 1996 Rover 800

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.