System Description (page 2 of 2)

The following diagnostic trouble codes are supported by the Airbag Control Module:

• 12 Low battery voltage
• 13 Air bag circuit shorted to ground
• 14 Front impact sensor circuit shorted to ground
• 21 Safing impact sensor incorrectly mounter to vehicle
• 22 Safing impact sensor output shorted to battery voltage
• 23 Safing impact sensor input feed / return open circuit
• 24 Safing impact sensor output feed / return open circuit
• 32 Driver side airbag circuit high resistance or open
• 33 Passenger side airbag circuit high resistance or open
• 34 Driver side airbag circuit low resistance or short circuit
• 41 Front right impact sensor feed / return open circuit
• 42 Front left impact sensor feed / return open circuit
• 44 Front right impact sensor incorrectly mounted to vehicle
• 45 Front left impact sensor incorrectly mounted to vehicle
• 51 Airbag CM internal thermal fuse - intermittent short to ground
• 52 Back up power supply - voltage boost fault
• 53 Front impact sensor circuits resistance to ground or internal Airbag CM failure