Training

Training

The training programme incorporated into the PDU software is designed to cover the needs of new users and those who have basic PDU skills but require further training on the DMM and Datalogger functions.

Select 'Training' from the PDU main menu to bring up the training menu.

New User Training

The new user training program takes the student through a structured sequence of activities to learn the meaning and use of the basic screen icons. The trainee may then work through programmed exercises to learn the digital multi-meter and then the datalogger functions.

Existing User Training Menu

In this program the existing user may select training from the following list:

• User Screen Controls
• Digital Multi-Meter
• Datalogger

OBD II Scan Tool (Not 95 MY)

The OBD II Scan Tool is designed to access the memories of the engine and transmission control units to monitor and extract data relative to emissions control.

The following types of data may be accessed:

• Current Powertrain Data
• Monitor Freeze Frame Data
• Request Trouble Codes
• Clear Trouble Codes
• Request Oxygen Sensor Test Results
• Monitor Oxygen Sensors
• Display Pending Trouble Codes
• Request On-Board Monitoring Test Results
• Examine Readiness Tests
• Malfuction Lamp Status

The data to be monitored is selected from the OBD II main menu.

For example if Monitor Freeze Frame Data is selected, the system will display up to 11 parameters which are always recorded when a fault code is logged. The parameters are as follows: