TD5 Defender
ENGINE
15
REPAIR
NOTE: Non EU3 model illustrated.
9. Disconnect fuel hoses, tank to fuel cooler and
connector block on cylinder head.
CAUTION: Plug the connections.
10. Disconnect fuel hose from fuel cooler and secure
to connector block on cylinder head. This to
prevent contamination of the fuel system.
11. Release servo vacuum pipe, remove 4 bolts and
remove fuel cooler.
12. Release servo vacuum pipe from engine rear
cover clips and vacuum pump.
NOTE: Non EU3 model illustrated.
13. Disconnect vacuum hose from EGR valve.
14. Release EGR vacuum hose from vacuum pipe.
15. Disconnect multiplug from condensor cooling
fan.
NOTE: Non EU3 model illustrated.
16. Disconnect multiplugs from EGR solenoid, inlet
manifold sensor and injector harness.