TD5 Defender
ENGINE
17
REPAIR
23. Disconnect oil pressure switch multiplug.
24. Release engine harness from underside of inlet
manifold and tie aside.
25. Release clips and remove coolant top hose from
cylinder head and coolant rail.
26. Remove 4 bolts and move A/C compressor
aside.
27. Remove 3 bolts and remove PAS pump pulley.
28. Remove 4 bolts and move PAS pump aside.
29. Raise vehicle on ramp.
30. Remove 6 bolts securing gearbox housing to
engine.
31. Lower vehicle ramp.
32. Remove 2 upper bolts securing gearbox housing
to engine.
33. Remove bolt securing engine closing panel to
gearbox.
34. Release clip and coolant hose from engine oil
cooler.