Parking pawl assembly. (page 2 of 2)

7. Clean extension housing and gearbox case.
8. Position new gasket to gearbox case. Gasket - oil sump
9. Position extension housing and tighten bolts to 25 Nm (18 lbf.ft).

$% 44.24.05

10. Fit transfer gearbox. TRANSFER BOX - LT230SE,

Remove

REPAIRS, Transfer box - Diesel. TRANSFER BOX - LT230SE, REPAIRS, Transfer box - V8.

11. Fill automatic gearbox with oil. MAINTENANCE, PROCEDURES, Automatic gearbox.

Refit

1. Raise vehicle on ramp.

2. Drain automatic gearbox oil. MAINTENANCE, PROCEDURES, Automatic gearbox.

3. Remove 6 bolts and spacers securing oil sump to gearbox, remove sump and discard gasket.
1. Clean oil sump and mating face.
2. Fit new gasket to oil sump, position sump to gearbox.
3. Position spacers and tighten bolts to 8 Nm (6 lbf. ft).
4. Fill automatic gearbox with oil. MAINTENANCE, PROCEDURES, Automatic gearbox.
5. Lower vehicle.