repeater.

18. Secure multiplugs to steering column support 44. Connect chassis harness multiplugs. bracket and connect brake and clutch pedal 45. Position engine bay fuse box and connect multiplugs.
19. Connect multiplugs to column switch and 46. Connect multiplugs to front of fuse box. passive coil. 47. Position battery and starter cables and secure
20. Position passenger compartment fusebox, connect multiplugs, fit fusebox to fascia and 48. Fit fuse box cover. secure with nut. 49. Position earth lead and secure with nut.
21. Connect ignition switch multiplug to fuse box. 50. Feed harness through to front panel.
22. With assistance feed LH side of harness into 51. Secure fog lamp multiplug. engine bay. 52. Connect headlamp level motor, headlamp and
23. Connect multiplugs to front door harness and body harness. 53. Fit indicator lamp.
24. Position earth headers to LH lower 'A' post and secure with nuts.
25. Connect multiplugs to ECU pack. 54. Secure harness to RH front panel.
26. Position harness in engine bay. 55. Connect cooling fan and horn multiplug.
27. Connect and secure heated front screen 56. Secure harness to lower support rail. multiplugs. 57. Connect receiver drier and air temperature
28. Fit plenum molding. HEATING AND VENTILATION, 58. Fit front bumper. REPAIRS, Plenum Air Intake.
29. Connect multiplugs to ABS sensor and fuel cut-off switch. 59. Fit battery tray.
30. Using draw string feed harness through inner 60. Fit air filter assembly. wing, remove draw string, connect repeater lamp multiplug and fit lamp.
31. Connect multiplugs to ABS modulator. 61. Position both lower 'A' post trims and secure
32. Feed harness through to front panel.
33. Position body earth leads and secure with 62. Fit heater assembly. bolts.
34. Connect washer reservoir multiplugs and pipes, secure pipes with clips.
35. Secure fog lamp multiplug.
36. Secure earth header behind headlamp.
37. Connect multiplugs to headlamp level motor, headlamp and side lamp.
38. Fit indicator lamp LIGHTING, REPAIRS, Lamp - front repeater.
39. Connect multiplug to LH horn.
40. Feed harness to ACE accelerometer, connect multiplug and secure with cable ties.
41. Connect cruise control, ABS sensor and brake fluid level switch multiplugs.
42. Connect engine harness multiplug and feed harness along RH wing to fuse box.
43. Using draw string pull harness through inner wing, remove draw string, connect repeater lamp multiplug and fit lamp.

multiplugs, fit fuse box and secure with screws.

with screws.

side lamp multiplugs.

LIGHTING, REPAIRS, Lamp - front

repeater.

sensor multiplugs.

EXTERIOR FITTINGS, REPAIRS, Bumper assembly - front.

ENGINE MANAGEMENT SYSTEM - V8, REPAIRS, Air cleaner assembly.

with studs.

HEATING AND VENTILATION, REPAIRS, Heater assembly - models with air conditioning. HEATING AND VENTILATION, REPAIRS, Heater assembly - models without air conditioning.