Workshop Manuals Factory service & repair Land Rover
Land Rover Discovery II (UK)41 · Panel repairs
41 · General

Repair

Make
Land Rover
Model
Discovery II (UK)
Section
Repairs › Repair
Panel repairsRepair

Repair

Dash side assembly

NOTE: In this procedure, the front wing, 'A' post assembly and the valance outer reinforcement (rear section) are replaced in conjunction with the dash side assembly.

Remove

  1. Disconnect both battery leads, negative lead first.
  2. Disconnect leads/multiplug from alternator.
  3. Remove 'A' post assembly. PANEL REPAIRS, REPAIRS, 'A' post assembly.

Refit

M77 1691
M77 1696B
  1. Remove existing panel(s), prepare panel joint faces and install new panel(s) in accordance with Panel Replacement Procedure. Punch or drill holes in new panel for plug welding as shown.
  2. Fit 'A' post assembly. PANEL REPAIRS, REPAIRS, 'A' post assembly.
  3. Connect leads/multiplug to alternator.
  4. Connect battery leads, negative lead last..

Parts & tools for this job For Land Rover Discovery

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.