REPAIRS, Filler tube - fuel.

13. Fit front door striker to B/C post, fit Torx bolts and tighten to 26 Nm (19 lbf.ft). Panel body side assembly
14. Fit rear door. DOORS, REPAIRS, Door - rear.
15. Connect leads/multiplug to alternator. Remove
16. Connect battery leads, negative lead last.
10. Remove mud flap.
11. Remove tread plate from rear door aperture.
12. Remove rear door aperture seal.
13. Remove rear door striker from 'D' post.
14. Remove 'D' post outer trim finisher.
15. Remove wheel arch trim finisher.
16. Remove side drip rail finisher.
17. RH side:
18. LH side:
19. Remove tail door tread plate.
20. Remove loadspace carpet retainer.
21. Remove tail door aperture seal.
22. Remove tail lamp.
23. RH side:
24. RH side:
25. Remove aerial amplifier.
26. Remove relevant wiring from body side area.
1. Disconnect both battery leads, negative lead first.
2. Disconnect leads/multiplug from alternator.
3. Remove loadspace side trim casing. INTERIOR TRIM COMPONENTS, REPAIRS, Trim casing - side - loadspace.
4. Remove head lining rear trim finisher.
5. Remove rear head rests, if fitted.
6. Remove body side rear glass. SCREENS, REPAIRS, Glass - body side - rear.
7. Remove rear bumper assembly. EXTERIOR FITTINGS, REPAIRS, Bumper assembly - rear - up to 03MY.
8. Remove rear bumper finisher.
9. Remove rear wheel arch liner. EXTERIOR FITTINGS, REPAIRS, Liner - wheel arch - rear.

Remove tail door. Remove tail door striker and setting block from 'E' post.

LIGHTING, REPAIRS, Lamp - tail. Remove fuel filler flap. Remove fuel filler tube. FUEL DELIVERY SYSTEM - V8,

REPAIRS, Filler tube - fuel.