Workshop Manuals Factory service & repair Land Rover
Land Rover Discovery II (UK)33 · Restraint systems
33 · Body & interior

Mounting - seat belt - 'B' post

Make
Land Rover
Model
Discovery II (UK)
Section
Repairs › Mounting - seat belt - 'B' post
Restraint systemsMounting - seat belt - 'B' post

Mounting - seat belt - 'B' post

$% 76.73.26

Remove

Mounting - seat belt - 'b' post – $% 76.73.26

Refit

  1. Release front door aperture seal from 'B' post.
  2. Release rear door aperture seal from 'B' post.
  3. Release clip securing upper 'B' post trim.
  4. Remove 'B' post upper trim.
  5. Remove nut securing seat belt upper anchorage to mounting.
Mounting - seat belt - 'b' post – Remove nut securing seat belt upper anchorage to mounting.
  1. Remove 2 Torx bolts securing mounting to 'B' post.
  2. Remove mounting.
  3. Fit mounting to upper 'B' post and tighten Torx bolts to 22 Nm (16 lbf.ft).
  4. Fit seat belt upper anchorage to mounting and tighten nut to 32 Nm (24 lbf.ft).
  5. Secure trim casing to 'B' post with clip.
  6. Fit front and rear door aperture seals to 'B' post.

Parts & tools for this job For Land Rover Discovery

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.