finisher - bumper - front - from 03MY.

3. Connect front wiper delay multiplug and fit multiplug to switch bracket. Jet - washer - headlamp
4. Fit passive coil to column lock.
5. Fit rotary coupler.

$% 84.20.08 RESTRAINT SYSTEMS, REPAIRS, Rotary coupler. The procedure to remove the headlamp washer jet on 03MY vehicles is detailed in the front bumper finisher job.

finisher - bumper - front - from 03MY.

Remove

Refit

EXTERIOR FITTINGS, REPAIRS, Trim

1. Remove retaining screw cover from jet housing.
2. Remove screw securing jet to bumper.
3. Release jet and withdraw sufficiently to gain access to washer tube. Disconnect tube from jet and remove jet.
1. Connect jet to washer tube, ensuring it is pushed fully home.
2. Locate jet in bumper, retain with screw and fit screw cover.