Workshop Manuals Factory service & repair Land Rover
01 Introduction02 General information03 Information04 Maintenance05 Engine - K Series06 Engine - L Series07 Emission control08 Engine management system - MEMS09 Engine management system - EDC10 Fuel delivery system11 Cooling system - K Series12 Cooling system - L Series13 Manifold & exhaust systems14 Clutch15 Manual gearbox - PG116 Transfer box - IRD17 Drive shafts18 Rear axle and final drive19 Steering20 Front suspension21 Rear suspension22 Brakes23 Restraint systems24 Body25 Heating & ventilation26 Air conditioning27 Wipers & washers28 Electrical29 Instruments
Land Rover Freelander Workshop Manual (1998-2000)06 · Engine - L Series
06 · Engine

Models fitted with air conditioning. (page 2 of 2)

Make
Land Rover
Model
Freelander Workshop Manual
Year
1998–2000
Section
Repairs
Engine - L SeriesModels fitted with air conditioning. · page 2 of 2
Diagram
  1. Fit LRT-12-138 to suitable lifting chains, and connect to lifting eyes on engine.
  2. Take weight of engine on lifting chains.
Take weight of engine on lifting chains.
  1. Remove bolt securing LH engine mounting support strut to starter motor.
  2. Remove bolt securing LH engine mounting support strut to mounting.
  3. Remove LH engine mounting support strut.
Remove LH engine mounting support strut.
  1. Remove through bolt from LH engine mounting. remove 4 bolts securing LH engine mounting bracket to body.
  2. Remove LH engine mounting bracket.
  3. With assistance, lower engine and gearbox from vehicle.

Parts & tools for this job For 1998 Land Rover Freelander

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.