Diagnostic procedure
- Make
- Mazda
- Model
- MX-5 (NC) Factory Workshop Manual
- Year
- 2006–2008
- Section
- Symptom Troubleshooting › Diagnostic procedure
Engine performanceDiagnostic procedure
DIAGNOSTIC PROCEDURE
HIGH OIL CONSUMPTION/LEAKAGE DIAGNOSTIC PROCEDURE TABLE
| STEP | INSPECTION | RESULTS | ACTION |
|---|---|---|---|
| 1 | Remove and shake the PCV valve. Does the PCV valve rattle? | Yes | Go to the next step. |
| No | Replace the PCV valve. | ||
| 2 | Inspect for the following: • External leakage • Proper dipstick • Proper engine oil viscosity Are all items normal? | Yes | Inspect the internal engine parts such as valves, valve guides, valve stem seals, cylinder head drain passage, and piston rings. |
| No | Service if necessary. Repeat Step 2. | ||
| 3 | • Verify test results. • If normal, return to diagnostic index to service any additional symptoms. (See ENGINE SYMPTOM TROUBLESHOOTING [LF] .) • If malfunction remains, inspect related Service Bulletins and/or On-line Repair Information and perform repair or diagnosis. • If vehicle is repaired, troubleshooting completed. • If vehicle is not repaired or additional diagnostic information is not available, replace the PCM. (See PCM REMOVAL/INSTALLATION [LF] .) | ||
NO.17 COOLING SYSTEM CONCERNS-OVERHEATING [LF]
POSSIBLE CAUSE & DESCRIPTION (COOLING SYSTEM CONCERNS-OVERHEATING)
| 17 DESCRIPTION | COOLING SYSTEM CONCERNS- OVERHEATING Engine runs at higher than normal temperature/overheats. |
| • Improper coolant level • Blown fuses • Coolant leakage • Excessive A/C system pressure |
Parts & tools for this job For 2006 Mazda MX-5
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
As an Amazon Associate we earn from qualifying purchases.