Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)03 · Engine performance
03 · Engine

Diagnostic procedure

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Symptom Troubleshooting › Diagnostic procedure
Engine performanceDiagnostic procedure · page 1 of 2

circuit malfunction (MT)

  • TR switch or related circuit malfunction (AT)
  • Improper A/C magnetic clutch operation

DIAGNOSTIC PROCEDURE

LOW IDLE/STALLS DURING DECELERATION DIAGNOSTIC PROCEDURE TABLE

STEPINSPECTIONRESULTSACTION
1Does the engine idle roughly?YesGo to symptom troubleshooting "No.8
Engine runs rough/rolling idle". (See NO.8 ENGINE
RUNS
ROUGH/ROLLING
IDLE [LF] .)
NoGo to the next step.
2Turn off the A/C switch and fan switch.
Does the A/C magnetic clutch engage?
YesGo to symptom troubleshooting "No.24
A/C is always on or A/C compressor runs continuously." (See NO.24 A/C IS
ALWAYS ON OR A/C
COMPRESSOR RUNS
CONTINUOUSLY [LF] .)
NoGo to the next step.
3Verify the following:
• Proper routing of and no damage to vacuum lines
• No air leakage from intake-air system
Are all items normal?
YesGo to the next step.
NoService if necessary.
Repeat Step 3.
YesDTC is displayed:
Go to the appropriate
DTC inspection. (See DTC TABLE [LF] .)
4
Connect the M-MDS or
equivalent to the DLC-2.
Turn the ignition switch
to the ON position
(Engine off).
Retrieve any DTCs.

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.