Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)03 · Engine performance
03 · Engine

Diagnostic procedure

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Symptom Troubleshooting › Diagnostic procedure
Engine performanceDiagnostic procedure · page 1 of 5

complete "BEFORE SERVICE PRECAUTION" and "AFTER SERVICE MANUAL" described in this article.

(See BEFORE SERVICE PRECAUTION [LF] .)

(See AFTER SERVICE PRECAUTION [LF] .)

CAUTION: Disconnecting/connecting quick release connector without cleaning it may cause damage to fuel pipe and quick release connector. Always clean quick release connector joint area before disconnecting/connecting, and make sure that it is free of foreign material.

DIAGNOSTIC PROCEDURE

LACK/LOSS OF POWER-ACCELERATION/CRUISE DIAGNOSTIC PROCEDURE TABLE

STEPINSPECTIONRESULTSACTION
1Verify the following:
• Vacuum connection
• Restriction in intake-air system (such as air cleaner element, fresh air duct)
YesGo to the next step.
• No air leakage from intake-air system
• No restriction of intake-air system
• Proper sealing of intake manifold and components attached to intake manifold; such as
EGR valve
• Fuel quality (such as proper octane,
NoService if necessary. Repeat
Step 1.

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.