Diagnostic procedure (page 2 of 5)
- Make
- Mazda
- Model
- MX-5 (NC) Factory Workshop Manual
- Year
- 2006–2008
- Section
- Symptom Troubleshooting
Engine performanceDiagnostic procedure · page 2 of 5
Table incomplete in source. The printed source cuts this table off at the right page edge, so some text in the last column is missing.
| contamination, winter/summer blend) Are all items normal? | |||
| 2 | Connect the M-MDS or equivalent to the DLC- 2. Turn the ignition switch to the ON position (Engine off). Retrieve any DTCs. Are there any DTCs displayed? | Yes | DTC is displayed: Go to the appropriate DTC inspection. (See DTC TABLE [LF] .) |
| No | DTC is displayed: Go to the next step. | ||
| 3 | Is the engine overheating? | Yes | Go to symptom troubleshooting NO.17 COOLING SYSTEM CONCERNS- OVERHEATING [LF] . |
| No | Go to the next step. | ||
| 4 | Connect the M-MDS or equivalent to the DLC- 2. Access APP1, APP2, RPM, MAF, TP, IAT and VSS PIDs. Drive vehicle while monitoring PIDs. Are PIDs within specifications? (See PCM INSPECTION [LF] .) | Yes | Go to the next step. |
| No | APP1, APP2 PIDs: Inspect if output signal accelerator pedal position sensor changes smoothly. RPM PID: Inspect CKP sensor and related wiring harness for vibration or intermittent open/short circuit or both. MAF PID: Inspect for intermittent open circuit of MAF sensor and related wiring harness. TP PID: Inspect if output signal TP sensor changes smoothly. IAT PID: Inspect for air suction in intake- air system. If normal, inspect intermittent short circuit of IAT sensor and related wiring harnesses. VSS PID: Inspect for intermittent open circuit of VSS and related wiring harness. |
5
Visually inspect the
Yes
Go to the next step.
CKP sensor and teeth of
Parts & tools for this job For 2006 Mazda MX-5
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
As an Amazon Associate we earn from qualifying purchases.