Diagnostic procedure
- Make
- Mazda
- Model
- MX-5 (NC) Factory Workshop Manual
- Year
- 2006–2008
- Section
- Symptom Troubleshooting › Diagnostic procedure
- Improper variable valve timing control system operation
- Improper valve timing
- Immobilizer system and/or circuit malfunction
- Immobilizer system operating properly. (Ignition key is not registered.)
- Pressure regulator malfunction (built-in fuel pump unit)
WARNING: The following DIAGNOSTIC PROCEDURE TABLE contains the fuel system diagnosis and repair procedures. Read the following warnings before servicing the fuel system:
Fuel vapor is hazardous. It can easily ignite, causing serious injury and damage. Always keep sparks and flames away from fuel.
Fuel line spills and leakage are
POSSIBLE CAUSE
dangerous. Fuel can ignite and cause serious injuries or death and damage. Fuel can also irritate skin and eyes. To prevent this, always complete "BEFORE SERVICE PRECAUTION" and "AFTER SERVICE PRECAUTION" described in this article.
(See BEFORE SERVICE PRECAUTION [LF] .)
(See AFTER SERVICE PRECAUTION [LF] .)
CAUTION: Disconnecting/connecting quick release connector without cleaning it may cause damage to fuel pipe and quick release connector. Always clean quick release connector joint area before disconnecting/connecting, and make sure that it is free of foreign material.
DIAGNOSTIC PROCEDURE
Parts & tools for this job For 2006 Mazda MX-5
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
As an Amazon Associate we earn from qualifying purchases.