Diagnostic procedure
- Make
- Mazda
- Model
- MX-5 (NC) Factory Workshop Manual
- Year
- 2006–2008
- Section
- Symptom Troubleshooting › Diagnostic procedure
Engine performanceDiagnostic procedure · page 1 of 3
(See BEFORE SERVICE PRECAUTION [LF] .)
(See AFTER SERVICE PRECAUTION [LF] .)
CAUTION: Disconnecting/connecting quick release connector without cleaning it may cause damage to fuel pipe and quick release connector. Always clean quick release connector joint area before disconnecting/connecting, and make sure that it is free of foreign material.
DIAGNOSTIC PROCEDURE
HARD TO START/LONG CRANK/ERRATIC START/ERRATIC CRANK DIAGNOSTIC
PROCEDURE TABLE
| STEP | INSPECTION | RESULTS | ACTION |
|---|---|---|---|
| 1 | Inspect for the following: • Vacuum leakage • Proper fuel quality (such as proper octane, contamination, winter/summer blend) • Loose bands on intake-air system • Cracks on intake- air system parts • Intake-air system restriction (such as air cleaner element, fresh air duct.) Are all items normal? | Yes | Go to the next step. |
| No | Service if necessary. Repeat Step 1. |
2
Connect the M-MDS or
Yes
DTC is displayed:
equivalent to the DLC-
Go to the appropriate DTC
Parts & tools for this job For 2006 Mazda MX-5
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
As an Amazon Associate we earn from qualifying purchases.