Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)03 · Engine performance
03 · Engine

Diagnostic procedure

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Symptom Troubleshooting › Diagnostic procedure
Engine performanceDiagnostic procedure · page 1 of 2

CAUTION: Disconnecting/connecting quick release connector without cleaning it may cause damage to fuel pipe and quick release connector. Always clean quick release connector joint area before disconnecting/connecting, and make sure that it is free of foreign material.

DIAGNOSTIC PROCEDURE

POOR FUEL ECONOMY DIAGNOSTIC PROCEDURE TABLE

STEPINSPECTIONRESULTSACTION
1Inspect for the following:
• Air cleaner element for contamination
• ATF level (AT)
• Fuel quality
• Coolant level
• Brake dragging
• Clutch slippage (MT)
Are all items normal?
YesGo to the next step.
NoService if necessary.
Repeat Step 1.
2Connect the M-MDS or equivalent to the DLC- 2.
Turn the ignition switch to the ON position (Engine off).
Retrieve any DTCs.
Are there any DTCs displayed?
YesDTC is displayed:
Go to the appropriate DTC inspection. (See DTC TABLE [LF] .)
NoNo DTC is displayed:
Go to the next step.
3Access ECT PID.
Drive vehicle while monitoring PID. (See PCM
INSPECTION [LF] .)
Is PID within specification?
YesGo to the next step.
NoInspect for coolant leakage, cooling fan and condenser fan operations or thermostat operation.

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.