Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)03 · Engine performance
03 · Engine

Diagnostic procedure

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Symptom Troubleshooting › Diagnostic procedure
Engine performanceDiagnostic procedure · page 1 of 8
  • Fuel line spills and leakage are dangerous. Fuel can ignite and cause serious injuries or death and damage. Fuel can also irritate skin and eyes. To prevent this, always complete "BEFORE SERVICE PRECAUTION" and "AFTER SERVICE PRECAUTION" described in this article.

(See BEFORE SERVICE PRECAUTION [LF] .)

(See AFTER SERVICE PRECAUTION [LF] .)

CAUTION: Disconnecting/connecting quick release connector without cleaning it may cause damage to fuel pipe and quick release connector. Always clean quick release connector joint area before disconnecting/connecting, and make sure that it is free of foreign material.

DIAGNOSTIC PROCEDURE

ENGINE STALLS-AFTER START/AT IDLE DIAGNOSTIC PROCEDURE TABLE

STEPINSPECTIONRESULTSACTION
1Connect the M-MDS or equivalent to the DLC- 2.
Do the following conditions appear?
• The engine is not completely started.
• DTC P1260 is displayed.
YesBoth conditions appear:
Go to Step 3.
NoEither or other condition appears:
Go to the next step.
2Does the engine stall after approx. 2s since the engine is started?YesGo to the next step.
NoImmobilizer system is normal.
Go to Step 8.
YesGo to the next step.
3
Is coil connector

securely connected to

No

Connect the coil connector

coil?

securely.

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.