Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)03 · Engine performance
03 · Engine

Diagnostic procedure (page 2 of 8)

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Symptom Troubleshooting
Engine performanceDiagnostic procedure · page 2 of 8

Table incomplete in source. The printed source cuts this table off at the right page edge, so some text in the last column is missing.

Return to Step 2.
4Does the security light flush?YesGo to the next step.
NoInspect and repair or replace the following:
• Wiring harnesses and connectors from keyless control module terminal
3F and instrument cluster terminal 2F
• Instrument Cluster (See
INSTRUMENT
CLUSTER
INSPECTION )
5Connect the M-MDS or equivalent to the DLC-2 and retrieve DTC for
PCM, instrument cluster and keyless control module (with advanced keyless entry system).
Are any of the following DTCs displayed?
DTC
PCM: B1342, U0073, U0155
Instrument cluster:
B1213, B1600, B1601, B1602, B1681, B2103, 2139, B2431, U0110, U0214
Keyless control module (with advanced keyless entry system): B1681, B2103, B1213
YesGo to the appropriate DTC inspection. (See DTC TABLE [LF] .)
NoGo to the next step.

6

Inspect for the

Yes

Repair or replace the suspected

following wiring

wiring harness and connector.

harnesses and connectors: With advanced keyless entry system:

  • Between coil

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.