Diagnostic procedure
- Make
- Mazda
- Model
- MX-5 (NC) Factory Workshop Manual
- Year
- 2006–2008
- Section
- Symptom Troubleshooting › Diagnostic procedure
Engine performanceDiagnostic procedure · page 1 of 2
sure that it is free of foreign material.
DIAGNOSTIC PROCEDURE
EXHAUST SMOKE DIAGNOSTIC PROCEDURE TABLE
| STEP | INSPECTION | RESULTS | ACTION |
|---|---|---|---|
| 1 | What color is smoke coming from the exhaust system? | Blue | Burning oil is indicated. Go to the next step. |
| White | Water in combustion is indicated. Go to Step 3. | ||
| Black | Rich fuel mixture is indicated. Go to Step 4. | ||
| 2 | Remove and shake the PCV valve. Does the PCV valve rattle? | Yes | Inspect for the following: • Damaged valve guide, stems or valve seals • Blocked oil drain passage in cylinder head • Piston ring is not seated, seized or worn. • Damaged cylinder bore If other driveability symptoms are present, return to diagnostic index to service any additional symptoms. |
| No | Replace the PCV valve. | ||
| 3 | Does the cooling system hold pressure? | Yes | Inspect for the following: • Cylinder head gasket leakage • Intake manifold gasket leakage • Cracked or porous engine block If other driveability symptoms are present, return to diagnostic index to service any additional symptoms. |
| No | Inspect for cause. | ||
| Yes | Go to the next step. 4 Inspect for the following: Air cleaner restriction |
Parts & tools for this job For 2006 Mazda MX-5
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
As an Amazon Associate we earn from qualifying purchases.