Diagnostic procedure
- Make
- Mazda
- Model
- MX-5 (NC) Factory Workshop Manual
- Year
- 2006–2008
- Section
- Symptom Troubleshooting › Diagnostic procedure
Engine performanceDiagnostic procedure · page 1 of 3
- A/C system operation is improper
- Improper water/anti-freeze mixture
- Fans reverse rotation
- Poor radiator condition
- Thermostat malfunction
POSSIBLE CAUSE
- Radiator hoses damage
- Improper or damaged radiator cap
- Cooling fan is inoperative.
- Coolant overflow system malfunction
- Improper tension of drive belt
- Drive belt damage
DIAGNOSTIC PROCEDURE
COOLING SYSTEM CONCERNS-OVERHEATING DIAGNOSTIC PROCEDURE TABLE
| STEP | INSPECTION | RESULTS | ACTION |
|---|---|---|---|
| 1 | Inspect the following: • Engine coolant level • Coolant leakage • Water and anti-freeze mixture • Radiator condition • Collapsed or restricted radiator hoses • Radiator pressure cap • Overflow system • Fan rotational direction • Fuses Are all items normal? | Yes | Go to the next step. |
| No | Service if necessary. Repeat Step 1. | ||
| 2 | Connect the M-MDS or equivalent to the DLC-2. Turn the ignition switch to the ON position (Engine off). Retrieve any DTCs. Are there any DTCs displayed? | Yes | DTC is displayed: Go to the appropriate DTC inspection. (See DTC TABLE [LF] .) |
| No | No DTC is displayed: Go to the next step. | ||
| Yes | Go to Step 5. 3 Start the engine and idle it. |
Turn the A/C switch on and set
No
Inspect for the
Parts & tools for this job For 2006 Mazda MX-5
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
As an Amazon Associate we earn from qualifying purchases.