Diagnostic procedure
- Make
- Mazda
- Model
- MX-5 (NC) Factory Workshop Manual
- Year
- 2006–2008
- Section
- Symptom Troubleshooting › Diagnostic procedure
- Spark-Spark weak
- Air/fuel mixture-Too rich
- Compression-Low compression
- Clogging in intake/exhaust system
Grayish white with all plugs:
- Air/fuel mixture-Too lean
WARNING: The following DIAGNOSTIC PROCEDURE TABLE contains the fuel system diagnosis and repair procedures. Read the following warnings before servicing the fuel system:
Fuel vapor is hazardous. It can easily ignite, causing serious injury and damage. Always keep sparks and flames away from fuel.
POSSIBLE CAUSE
- Fuel line spills and leakage are dangerous. Fuel can ignite and cause serious injuries or death and damage. Fuel can also irritate skin and eyes. To prevent this, always complete "BEFORE SERVICE PRECAUTION" and "AFTER SERVICE PRECAUTION" described in this article.
(See BEFORE SERVICE PRECAUTION [LF] .)
(See AFTER SERVICE PRECAUTION [LF] .)
CAUTION: Disconnecting/connecting quick release connector without cleaning it may cause damage to fuel pipe and quick release connector. Always clean quick release connector joint area before disconnecting/connecting, and make sure that it is free of foreign material.
DIAGNOSTIC PROCEDURE
SPARK PLUG CONDITION DIAGNOSTIC PROCEDURE TABLE
Table incomplete in source. The printed source cuts this table off at the right page edge, so some text in the last column is missing.
| STEP | INSPECTION | RESULTS | ACTION | |
| 1 | Remove all the spark | Yes | Troubleshooting completed. | |
| plugs. |
Parts & tools for this job For 2006 Mazda MX-5
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
As an Amazon Associate we earn from qualifying purchases.