Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)03 · Engine performance
03 · Engine

Water sprinkling method

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Symptom Troubleshooting › Water sprinkling method
Engine performanceWater sprinkling method
  1. Prepare the output state control function for actuators or relays that you are inspecting.
  2. Vibrate the actuator or relay with your finger for 3s after output state control function is activated.
    • If variable click sound is heard, check for poor connection or poorly mounted actuator or both, or the relay.

NOTE: Vibrating relays too strongly may result in open relays.

ENGINE PERFORMANCE – Symptom Troubleshooting – figure
Fig. 10: Vibrating Actuator Or Relay
Courtesy of MAZDA MOTORS CORP.

WATER SPRINKLING METHOD

If malfunction occurs only under high humidity or rainy/snowy weather, perform the following steps:

CAUTION: Indirectly change the temperature and humidity by spraying water onto the front of the radiator.

If a vehicle is subject to water leakage, the leakage may damage the control module. When testing a vehicle with a water leakage problem, special caution must be used.

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.