Diagnostic procedure
- Make
- Mazda
- Model
- MX-5 (NC) Factory Workshop Manual
- Year
- 2006–2008
- Section
- Symptom Troubleshooting › Diagnostic procedure
Engine performanceDiagnostic procedure · page 1 of 5
skin and eyes. To prevent this, always complete "BEFORE SERVICE PRECAUTION" and "AFTER SERVICE PRECAUTION" described in this article.
(See BEFORE SERVICE PRECAUTION [LF] .)
(See AFTER SERVICE PRECAUTION [LF] .)
CAUTION: Disconnecting/connecting quick release connector without cleaning it may cause damage to fuel pipe and quick release connector. Always clean quick release connector joint area before disconnecting/connecting, and make sure that it is free of foreign material.
DIAGNOSTIC PROCEDURE
ENGINE STALLS/QUITS, ENGINE RUNS ROUGH, MISSES, BUCK/JERK,
HESITATION/STUMBLE, SURGES DIAGNOSTIC PROCEDURE TABLE
| STEP | INSPECTION | RESULTS | ACTION |
|---|---|---|---|
| 1 | Verify the following: • Vacuum connection • Air cleaner element • No air leakage from intake-air system • No restriction of | Yes | Go to the next step. |
| intake-air system • Proper sealing of intake manifold and components attached to intake manifold: such as EGR valve • Ignition wiring • Fuel quality (such as proper octane, contamination, winter/summer | No | Service if necessary. Repeat Step 1. |
Parts & tools for this job For 2006 Mazda MX-5
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
As an Amazon Associate we earn from qualifying purchases.