Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)03 · Engine performance
03 · Engine

Diagnostic procedure (page 2 of 5)

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Symptom Troubleshooting
Engine performanceDiagnostic procedure · page 2 of 5

Table incomplete in source. The printed source cuts this table off at the right page edge, so some text in the last column is missing.

Are all items normal?blend)
• Electrical connections
• Smooth operation of throttle valve
2Connect the M-MDS or equivalent to the DLC- 2.
Turn the ignition switch to the ON position (Engine off).
Retrieve any DTCs.
Are there any DTCs displayed?
YesDTC is displayed:
Go to the appropriate DTC inspection. (See DTC TABLE [LF] .)
NoNo DTC is displayed:
Go to the next step.
3Is engine overheating?YesGo to symptom troubleshooting
NO.17 COOLING SYSTEM
CONCERNS- OVERHEATING [LF] .
NoGo to the next step.
4Connect the M-MDS or equivalent to the DLC- 2.
Access APP1, APP2, RPM, VPWR, MAF, TP and VSS PIDs.
Drive the vehicle with monitoring PIDs.
Are PIDs within specifications? (See PCM
INSPECTION [LF] .)
YesGo to the next step.
NoAPP1, APP2 PIDs:
Inspect if output signal from accelerator pedal position sensor changes smoothly.
RPM PID:
Inspect the CKP sensor and related wiring harness for vibration or intermittent open/short circuit.
VPWR PID:
Inspect for open circuit intermittently.
MAF PID:
Inspect for open circuit of the
MAF sensor and related wiring harness intermittently.
TP PID:
Inspect if output signal from TP sensor changes smoothly.
VSS PID:
Inspect for open circuit of VSS and related wiring harness intermittently.

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.