Diagnostic procedure (page 5 of 8)
- Make
- Mazda
- Model
- MX-5 (NC) Factory Workshop Manual
- Year
- 2006–2008
- Section
- Symptom Troubleshooting
Engine performanceDiagnostic procedure · page 5 of 8
| Are the APP1 and APP2 PIDs indicating that the accelerator pedal is in the released position? | • PCM terminal 1AJ- APP sensor terminal A • PCM terminal 1AV-APP sensor terminal B • PCM terminal 1AP- APP sensor terminal C • PCM terminal 1AL- APP sensor terminal D • PCM terminal 1AS- APP sensor terminal E • PCM terminal 1AO-APP sensor terminal F | ||
| 10 | Connect the M-MDS or equivalent to the DLC- 2. Access the TP PID. Crank the engine with accelerator pedal released. Are the TP PID indicates the closed throttle position? | Yes | Go to the next step. |
| No | Inspect for the following: • TP sensor • Wiring harnesses and connectors for following: • PCM terminal 2AK-TP sensor terminal F • PCM terminal 2AO-TP sensor terminal E • PCM terminal 2AP- TP sensor terminal C • PCM terminal 2AL- TP sensor terminal D |
11
Connect the M-MDS or
Yes
DTC is displayed:
equivalent to the DLC-
Go to appropriate DTC
2. Turn the ignition
inspection. (See DTC TABLE [LF] .)
switch to the ON
Communication error message
position (Engine off). Retrieve any DTCs.
is displayed:
Are there any DTCs
Inspect for the following:
displayed?
Parts & tools for this job For 2006 Mazda MX-5
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
As an Amazon Associate we earn from qualifying purchases.