Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)03 · Engine performance
03 · Engine

Diagnostic procedure (page 5 of 5)

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Symptom Troubleshooting
Engine performanceDiagnostic procedure · page 5 of 5
Plug opening end of vacuum hose.
Drive the vehicle.
Does the engine condition improve?
NoGo to the next step.
15Visually inspect the
CMP sensor and projections of camshaft pulley.
Are the CMP sensor and projections of camshaft pulley normal?
YesGo to the next step.
NoReplace the malfunctioning part.
16Inspect EGR system. (See EGR CONTROL
SYSTEM
INSPECTION .)
Is EGR system normal?
YesGo to the next step.
NoReplace the malfunctioning part according to EGR control system operation inspection results.
17Inspect the variable valve timing control system operation. (See VARIABLE
VALVE TIMING
CONTROL SYSTEM
OPERATION
INSPECTION .)
Does the variable valve timing control system function properly?
YesGo to the next step.
NoRepair or replace the malfunctioning part according to variable valve timing control system inspection results.
18Is the engine compression correct?YesInspect the following:
• Valve timing
• Internal transaxle components (AT)
• Clutch (MT)
• Brake system for dragging
NoInspect for cause.

19

  • Verify test results.
  • If normal, return to diagnostic index to service any additional symptoms.

(See ENGINE SYMPTOM TROUBLESHOOTING [LF] .)

  • If malfunction remains, inspect related Service Bulletins and/or On-line Repair Information and perform repair or diagnosis.

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.