Pressure Sensor, Replace (Brakes)

Make

Vauxhall

Model

Corsa C

Section

Repair Instructions › Pressure Sensor, Replace

BrakesPressure Sensor, Replace

Pressure Sensor, Replace   Remove 1.   Disconnect battery •   Detach ground terminal – Release nut 2.   Detach pressure sensor •   Disconnect wiring harness plug (1) from pressure sensor •   Unscrew pressure sensor (2) from hydraulic modulator Note:   Collect any escaping brake fluid.   Install 3.   Install pressure sensor •   Screw pressure sensor into hydraulic modulator 20 Nm •   Connect wiring harness plug 4.   Connect battery •   Attach ground cable – Tighten nut 5.   Brake System, Bleed 6.   Read out trouble codes and delete 7.   Program volatile memory

08 Brakes