Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat 500 Factory Service Manual (2007-2024)18 · Body panels and frame
18 · Body & interior

R.r rear crossmember

Make
Fiat
Model
500 Factory Service Manual
Year
2007–2024
Section
Removing-refitting › R.r rear crossmember
Body panels and frameR.r rear crossmember

R.R REAR CROSSMEMBER

Operation 7210B82 · STRUCTURAL ELEMENTS (CENTRE AND REAR SECTION)

1.2 8v, 1.3 Multijet, 1.4 16v

Removing

- Position the vehicle on a lift.

- Disconnect the negative battery terminal.

DescriptionConnector
BatterySee A001 BATTERY

- Remove both rear light clusters.

Op. 5540A44 REAR LIGHT CLUSTER (ONE), LEFT OR RIGHT - R.R.

Op. 7210E66 R.R. REAR BUMPER

1. Undo the fixing nuts (1a) and remove the rear crossmember (1b).

R.R REAR CROSSMEMBER

Refitting

1. Place the rear crossmember (1a) in position and tighten the fixing nuts (1b) to the recommended torque.

ComponentFasteningdiaValue (daNm)Validity
Rear crossmemberNutM82.4all versions
R.R REAR CROSSMEMBER

Op. 7210E66 R.R. REAR BUMPER

- Fit both rear light clusters.

Op. 5540A44 REAR LIGHT CLUSTER (ONE), LEFT OR RIGHT - R.R.

- Connect the negative battery terminal.

DescriptionConnector
BatterySee A001 BATTERY

- Remove the vehicle from the lift.

Parts & tools for this job For 2007 Fiat 500

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.