R.r. windscreen base trim
- Make
- Fiat
- Model
- 500 Factory Service Manual
- Year
- 2007–2024
- Section
- Removing-refitting › R.r. windscreen base trim
R.R. WINDSCREEN BASE TRIM
Removing
Op. 5050B34 WINDSCREEN WIPER ARM/S COMPLETE WITH BLADE - R+R
- Open the bonnet
1. Undo the upper trim fastenings.
2. Remove the upper windscreen base trim.
3. Undo the lower trim fastenings.
4. Remove the lower windscreen base trim.
Refitting
- Position the lower windscreen base trim.
- Position the upper windscreen base trim.
- Tighten the trim fastenings to the bodyshell.
- Close the bonnet.
Op. 5050B34 WINDSCREEN WIPER ARM/S COMPLETE WITH BLADE - R+R
Parts & tools for this job For 2007 Fiat 500
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Fiat touch up paint
- PARTPanel clip assortmentSearch: Fiat panel clips assortment
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.